Vehicle_Detection_Main

Vehicle Detection

 

Vehicle Detection

 

The effectiveness of an INDECT parking guidance system is greatly enhanced with vehicle detection technology. INDECT offers several vehicle sensing products that can be easily tailored to your parking system's conditions, traffic behavior, and other objectives.

The effectiveness of an INDECT parking guidance system is greatly enhanced with vehicle detection technology. INDECT offers several vehicle sensing products that can be easily tailored to your parking system's conditions, traffic behavior, and other objectives.

 

Surface Mounted Sensors
INDECT’s surface mounted induction pads are electromagnetic vehicle detection sensors. The pads are constructed of high-durability, UV-stable rubber. This protective mat allows the loops to be laid directly onto a pavement surface as a single unit.

The surface mounted RUBBER pads are ideal for uneven pavements or segmented paving, or situations that expose the pads to full sun and high ambient temperatures. The pads adhere to the pavement using a “SikaFlex 521 UV” adhesive. The surface mounted loop is ideal for situations that preclude the saw cutting such as post-tension concrete inside parking garages.

Three major advantages include:

  • No saw cutting and no compromise to the membrane effect of pavement
  • Can be used on uneven pavement or segmented paving
  • Quick and inexpensive installation

The Surface Mounted Induction are cost-effective and well suited for applications such as:

  • Control of car park boom gates
  • Vehicle detection in drive-through
  • Vehicle counting in toll booths
  • Car park space counting
  • Automatic motorized industrial doors and gates
  • Vehicle detection in car wash
  • Truck detection at loading docks

Magnetic Field Vehicle Detector
The heart of each Magnetic Field Vehicle Detector is a magneto-resistive sensor that measures the X, Y and Z-axis components of the Earth’s magnetic field. As vehicles come within range of the sensor, changes in the surrounding magnetic field occur and are detected. Each sensor continually monitors the background magnetic field to establish a base reference, allowing self-calibration. The Magnetic Field Vehicle Detector requires only 3-wires to communicate and receive power.

Detectors can be programmed onsite by using a proprietary interface module together with a notebook computer and system software, using the same interface support testing and firmware upgrading of the units.

Three versions available are:

  • In-ground
  • Surface Mount
  • Flush Mount

IGS - INDECT Ground Sensor
IGS is a space monitoring system for outdoor parking areas and garages where sensors can be installed in the ground. IGS is based on magnetic field technology and detects cars by measuring the changes they cause to the Earth's magnetic field statically (presence detection) and dynamically (entry/exit detection).

As soon as a car enters a space monitored by an IGS, the 3 axes of the Earth's magnetic field change due to the metal parts of the car. Deviations caused by neighboring vehicles or passing traffic etc. are compensated for by the IGS system.

Every monitored space is equipped with an IGS. These are either laid into a groove cut into the surface (and sealed after installation), pulled through an underground conduit/hose, or are laid onto concrete or asphalt and protected by a rubber hump glued to the surface.

All IGS INDECT Ground Sensors are cabled to achieve stable data transmission and power supply.

INDECT’s surface mounted induction pads are electromagnetic vehicle detection sensors.

 

IGS is based on magnetic field technology and detects cars by measuring the changes they cause to the Earth's magnetic field.

 

The heart of each magnetic field vehicle detector is a magneto-resistive sensor that measures the X, Y and Z-axis components of the Earth’s magnetic field.

 

+61 3 8610 6693
Indect Pty Ltd // Level 3, 480 Collins Street // Melbourne Victoria 3000
© 2016 INDECT Pty Ltd, a division of INDECT Electronics & Distribution GmbH. // All Rights Reserved.

 
Join Our Flicker Page Check Us Out On LinkedIn Follow Us On Google Plus Follow Us On Facebook Contact Us At IndectUSA
 

+61 3 8610 6693
Indect Pty Ltd // Level 3, 480 Collins Street // Melbourne Victoria 3000
© 2016 INDECT Pty Ltd, a division of INDECT Electronics & Distribution GmbH. // All Rights Reserved.

 
Join Our Flicker Page Check Us Out On LinkedIn Follow Us On Google Plus Follow Us On Facebook Contact Us At IndectUSA